Product Description

6 Inch RY Hot oil pump Structure Characteristics：

1. Basic structure is single stage single suction cantilever feet support, pump suction is axial inhaled, discharge center vertical, and installed in a same base with motor.
2. Pump supported by double ball bearing, front end lubricated by lubricating oil, back end lubricated by grease, a guide tubing in the middle, to observe the conditions of sealing at any time and recovery of heat conduction oil.

3. Hot oil pump shaft seal:

(1) With the combination of packing seal and mechanical seal, packing seal use high temperature resistant packing, has the good thermal adaptability, while mechanical seal adopts high mechanical strength and wear resistance, good hard alloy material, which guarantees the sealing performance under high temperature conditions.
(2) Adopts imported polytetrafluoroethylene (PTFE) as lip shape seal, make the sealing performance much better, seal reliability of 25 times than rubber seal, and with very strong corrosion-resist ability.

Performance Scope of RY Hot Oil Pump:
Capacity: 1-500m3/h;
Delivery lift: 10-125m;
Temperature: -20. C-350. C

Model	Capacity m 3 /h	Lift m	Speed r/min	Power kw		Efficiency η%	Motor-Y
				Shaft power	Power Distribution
RY150-150-200	350	50	2900	60	75	80	280S
RY150-150-200A	313	40	2900	45	55	76	250M