5 Inch RY Hot oil pump

Category:

Product Description

5 Inch RY Hot oil pump With scientific construction and excellent performance, it is used in transporting high temperature liquid without solid particles. And the corrosion-resistant degree and working temperature is depended on the material of the parts.

RY Hot oil pump shaft seal:

(1) With the combination of packing seal and mechanical seal, packing seal use high temperature resistant packing, has the good thermal adaptability, while mechanical seal adopts high mechanical strength and wear resistance, good hard alloy material, which guarantees the sealing performance under high temperature conditions.
(2) Adopts imported polyethylene (PTFE) as lip shape seal, make the sealing performance much better, seal reliability of 25 times than rubber seal, and with very strong corrosion-resist ability.

5 Inch RY Hot oil pump supported by double ball bearing, front end lubricated by lubricating oil, back end lubricated by grease, a guide tubing in the middle, to observe the conditions of sealing at any time and recovery of heat conduction oil.

Model Capacity
m 3 /h
Lift
m
Speed
r/min
Power kw Efficiency
η%
Motor-Y
Shaft
power
Power
Distribution
RY125-100-200 200 50 2900 35.4 45 77 225M
RY125-100-200A 178 40 2900 26.6 37 73 200L2
RY125-100-250 200 70 2900 47 55 80 250M
RY125-100-250A 190 63 2900 41.6 55 78 250M
RY125-100-250B 180 57 2900 37.9 45 74 225M
RY125-100-250C 170 51 2900 32.15 45 72 225M
RY125-100-250D 150 70 2900 40 45 70 225M