Centrifugal pump related products and working principle

Centrifugal pump related products :IS, IR type single-stage single-suction centrifugal pump;
ISG type vertical pipe centrifugal asphalt pump;
ISWB explosion-proof centrifugal pump;
YG centrifugal oil pump;
Micro centrifugal pump;
High pressure centrifugal pump;
ISW horizontal pipe centrifugal pump;

HMDL/CQ Magnetic drive pumps;
GDL type vertical multi-stage pipeline centrifugal pump IH chemical centrifugal pump;
Stainless steel centrifugal pump, etc

 

The working principle of centrifugal pump: the working principle of centrifugal pump is as follows.
When the centrifugal pump works, in addition to the pump body, there are also suction pipe, bottom valve, pressure pipe and so on.
Before the centrifugal pump starts to open the pump, the pump shell is filled with water by the water filling plug, the suction pipe and the pump shell are filled with water, and then the pump is started.
At this time, the power machine drives the pump shaft, so that the impeller rotation, full of water between the impeller blade runner.
Under the action of centrifugal force, from the center of the impeller is thrown to the outer edge of the impeller, the water enters the pump shell at high speed.
As the water flows out of the impeller, energy (kinetic energy and pressure energy) is obtained.

Pipeline centrifugal pump features:

1, the pump is a vertical structure, the inlet and outlet diameter is the same, and located in the same center line, can be installed in the pipeline like a valve, compact and beautiful appearance, small area, low construction investment, if add the protective cover can be placed in the outdoor use.
2. The impeller is directly installed on the extended shaft of the motor with short axial size and compact structure. The reasonable configuration of the pump and motor bearing can effectively balance the radial and axial loads generated by the operation of the pump, so as to ensure the smooth operation of the pump with little vibration and low noise.
3, the shaft seal adopts mechanical seal or mechanical seal combination, using imported titanium alloy sealing ring, medium heat resistant mechanical seal and hard alloy material, wear resistant seal, can effectively extend the service life of mechanical seal.
4, easy installation and maintenance, no need to dismantle the pipe road system, as long as the pump union nut can be removed all the rotor parts.
5. The serial and parallel operation mode of the pump can be adopted according to the usage requirements, that is, the needs of flow and head.
6. Vertical and horizontal pump installation can be adopted according to the requirements of pipeline layout.